There are many variations of the OAT hardware that you can build. It is therefore not possible to say here is the enclosure you should print. There are many variations of just how power is supplied to the system. This page is a collection of enclosures what people have built and contributed here over time.
Name |
Contributor |
Board |
Power |
LCD |
RA Stepper |
DEC Stepper |
ALT Stepper |
AZ Stepper |
GPS |
DigitalLevel |
Connectors |
Other |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Clutchplate |
Mega |
2x5V |
16x2 |
NEMA17/UART |
NEMA17/UART |
28BYJ-48 |
28BYJ-48 |
Yes |
Yes |
CAT6 |
Power meter |
|
Clutchplate |
ESP32 |
5V |
No |
28BYJ-48 |
28BYJ-48 |
No |
No |
No |
No |
CAT6 |
External Reset |
|
Cameron Tetford |
Mega |
5V** |
16x2 |
Any (External) |
Any (External) |
28BYJ-48 |
28BYJ-48 |
Yes |
Yes |
CAT6 |
**Can support multiple voltages simultaneously |
|
Marc Wagner |
TMC2209 Driver Boards |
Dedicated for steppers |
N/A |
NEMA17 (External) |
NEMA17 (External) |
No |
No |
N/A |
N/A |
CAT6 |
Easy mounting and relatively small footprint |
|
Regiss Osvold |
MKS 2.1 |
12V |
16x2 |
NEMA17/UART |
NEMA17/UART |
No |
No |
No |
No |
Direct to board |
Designed for use with stepper protectors |
|
OpenAstroTech |
MKS 1.0, 2.0, 2.1 |
12V |
16x2 |
NEMA17/UART |
NEMA17/UART |
Yes |
Yes |
Yes |
No |
Direct to board |
Very clean solution for MKS. Mounted on the underside of OATs base. |
|
Jacob Jennings |
MKS 2.1, Raspberry Pi |
Configurable |
16x2 |
NEMA17/UART |
NEMA17/UART |
No |
No |
No |
No |
Direct to board |
Has direct mounts for Pi, MKS and LCD for use with Astroberry |